Long, gorgeous curtains may be my single favorite element of any room. They instantly add drama and warmth to a space. However, hanging them always seems to be a bigger pain-in-the butt than anticipated. I was hanging some curtain rods for our guest bedroom this weekend and figured I’d share a few helpful tips I’ve learned over the years.
- Choose the appropriate rod- Make sure the rod is chunky enough to accommodate your window and curtains. If it’s a small kitchen window, go with something dainty. If it’s a living room window with floor to ceiling curtains, you’ll want a rod that is physically and visually a bit chunkier.
- Make sure the brackets work- If you’re hanging curtain panels or a valance over some sort of blind or shade, make sure the bracket sticks out from the wall far enough to accommodate what’s already there.
- Set aside the level- Normally, I’m a stickler for leveling everything, but not in this case. A perfectly level curtain rod can look terribly uneven if it’s close to an crooked ceiling. Instead, take measurements from your ceiling or window, whichever is closer. It may not actually be level, but visually, it will look so much better!
- Invest in a variety of drywall anchors- Use your stud finder (or just test with a nail) to see what you’re drilling into. If it’s wood, just use the screw. If it’s drywall, you’ll need something sturdier. There are a ton of different drywall anchors on the market. I find the twist and lock variety that look like a giant, plastic screw work much better than the cheap ones that come with your curtain rod.
- Pick the best place for your brackets- Rods are usually mounted 4″ above the window and brackets are usually 3″ from each side, but don’t be afraid to break the rules. Mounting your rod higher, for example, will add height to your room.
Here’s a great video from Pottery Barn with some helpful tips: